Mr. Bhat sir another interesting fact. We know Generally FTA STB work on basis of LNB freq. And tp frequency input by manually. Now here is trick to show any freq. By converting LNB freq.
when we do blind scan we need to set up LNB freq if it is 09750 or 10600 then only we found correct freq. Otherwise founded frequency feel like different. For an ex. When we scan ku band using LNB freq. 5150 , the tp freq. We get 3490 or like c band but actually it is above 10950. So to find correct tp freq we use
9750+5150-3490=11010
so if we want to show 11902 instead of 3490,
9750+ LNB freq. -11902=11010,
LNB =11010+11902-9750=13162
so 13162 is LNB freq. Put and try blind scan on FTA box on 83E. You will get all tps.
when we do blind scan we need to set up LNB freq if it is 09750 or 10600 then only we found correct freq. Otherwise founded frequency feel like different. For an ex. When we scan ku band using LNB freq. 5150 , the tp freq. We get 3490 or like c band but actually it is above 10950. So to find correct tp freq we use
9750+5150-3490=11010
so if we want to show 11902 instead of 3490,
9750+ LNB freq. -11902=11010,
LNB =11010+11902-9750=13162
so 13162 is LNB freq. Put and try blind scan on FTA box on 83E. You will get all tps.